TM 11-7440-293-14
4-9. INSTALLING ELECTRONIC LINE PRINTER RACK TO ELECTRONIC EQUIPMENT TABLE.
This task covers:
Installation
INITIAL SETUP
Personnel Required
Tools
One mechanic
1/2-inch box wrench (2 required)
Equipment Condition
Materials/Parts
Message entry group rack installed.
5/16-inch nut, self-locking
(4 required)
5/16-24 x 2 1/4 inch long hex head
screw (4 required)
5/16-inch flat washers (8 required)
Electronic line printer rack
ACTION
REMARKS
ITEM
LOCATION
Put electronic line printer rack on electro-
Electronic line
Electronic equip-
1.
nic equipment table and aline holes.
printer (1) and
ment table, curb-
side
electronic equip-
ment table (2)
2.
Electronic line
Screw (3), flat
Install, handtighten.
printer rack
There are four screws. Step 2 is
washers (4) and
typical for all four screws.
nut (5)
and electronic
equipment table
Do step 2 again.
Screw holes (6)
3.
Screw (3) and
4.
Using two 1/2-inch box wrenches, tighten.
There are four screws. Step 4 is
nut (5)
typical for all four screws.
Do step 4 again.
Screws (3) and
5.
nuts (5)
4-12
