TM 10-5411-234-13&P
CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
UNIT MAINTENANCE
MOUNTING PLATE THREADED RIVNUT REPLACEMENT
THIS SECTION COVERS:
Repair
INITIAL SETUP:
Personnel Required: One
Maintenance Level - Unit
Materials/Parts
Methylethylketone (WP 0055, Table 1, Item 3)
Tools and Special Tools
Sandpaper (WP 0055, Table 1, Item 8)
General Mechanic Tool Kit (WP 0041, Table 2,
Wiping Rags (WP 0055, Table 1, Item 6)
Item 1)
Light, Incandescent Adjustable With Tripod Base
Masking tape (WP 0055, Table 1, Item 5)
Goggles,Industrial (WP 0041, Table 2, Item 3)
Alodine, Brush (WP 0055, Table 1, Item 12)
Drill,Electric,Portable (WP 0041, Table 2, Item 4)
Adhesive, Two Part Epoxy (WP 0055, Table 1,
Item 9)
Drill Set, Twist (WP 0041, Table 2, Item 5)
Cartridges, 1/10 Gallon, Empty (WP 0055, Table
1, Item 10)
Gloves,Chemical And Oil Protective (WP 0041,
Nozzle, 2 1/2 in long with 1/8 in orifice (WP 0055,
Table 2, Item 6)
Table 1, Item 11)
Gun, Caulking (WP 0041, Table 2, Item 7)
Sheet, Aluminum, .032 inch thick X 12 inches X
12 inches (WP 0055, Table 1, Item 15)
Header, Hand-Operated (WP 0041, Table 2, Item
Sticks, Mixing (WP 0055, Table 1, Item 14)
11 OR 13)
Gloves, white, cloth (WP 0055, Table 1, Item 19)
Light machine oil (WP 0055, Table 1, Item 1)
Anti-seize Lubricant (WP 0055, Table 1, Item 2)
REPLACE
NOTE
For RIVNUT's which are not potted, knock out RIVNUT and replace with
same type.
Depending on RIVNUT size, select a drill bit in size range listed below:
Install Hole Size (inches)
RIVNUT Thread Size
Drill Size inches (inches)
MIN
MAX
10-32
Letter "E" or 1/4 (.250)
.250
.256
1/4-28
Letter "Q" (.332)
.333
.338
5/16-24
Letter "Z" (.413)
.414
.423
3/8-24
12.5 mm (.492)
.491
.500
0037 00-1
