TM 10-5411-234-13&P
CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
UNIT MAINTENANCE
PERSONNEL DOOR WEATHER STRIPPING
THIS SECTION COVERS:
Replace
INITIAL SETUP:
Personnel Required: One
CBC fully extended and locked position
Maintenance Level - Unit
Materials/Parts
Sandpaper, 100 Grit (WP 0055, Table 1, Item 8)
Tools and Special Tools
Solvent, Methylethylketone (WP 0055, Table 1,
Item 1)
Item 3)
Table 2, Item 6)
GENERAL
This procedure contains information and instructions to keep the CBC safe and in good working order by
inspecting and replacing a defective personnel door weather stripping.
INSPECT
Inspect the personnel door weather stripping (1) to ensure that it is fully attached to the upper and lower
personnel door opening frame members. Make sure that the weather stripping for both the upper (2) and
lower (3) door sections is not torn or otherwise damaged that would prevent the personnel door from
sealing properly and/or not preventing outside debris from entering the CBC.
REPLACE
Remove defective seal (1) and strip old adhesive from bonding surface (4).
WARNING
Methylethylketone is flammable and toxic and shall be used only in a
well-ventilated area away from all sparks or open flame. Gloves and
safety goggles should be worn during use.
Sand using sandpaper only if required to remove material not taken off in preceding step.
Wipe bonding surface (4) with a clean cloth dampened with solvent and immediately wipe solvent from
surface with a clean, dry cloth.
0035 00-1