TM 10-5411-234-13&P
CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
UNIT MAINTENANCE
LIFTING/LOCKING ASSEMBLY
THIS SECTION COVERS:
Replace
INITIAL SETUP:
Personnel Required: One
Lifiting/Locking Assembly unlocked and
disengaged from corner mounting (WP 0005)
Maintenance Level - Unit
Materials/Parts
Tools and Special Tools
General Mechanic Tool Kit (WP 0041, Table 2,
Item 1)
GENERAL
This procedure contains information and instructions to keep the CBC safe and in good working order by
inspecting and replacing a defective lifting/locking assembly.
INSPECT
Inspect the lifting/locking assembly (1) to ensure that all parts of the assembly function properly and that
there are no cracks or otherwise damaged parts that would prevent the lifting/locking assembly from
operating properly and safely.
REPLACE
To remove the lifting/locking assembly (1), remove the shoulder screw (2) and .032 inch thick x .562 inch
O.D. flatwasher (3) and .065 inch thick x .734 inch O.D. flatwasher (4) that secures the assembly (1) to
the roof (5) of the CBC.
Remove the entire assembly.
Install a new assembly (1) and align the hole (6) on the top of the lifting/locking assembly (1) with the hole
(7) in the CBC roof (5).
Install the shoulder screw (2), .032 inch thick x .562 inch O.D. flatwasher (3) and .065 inch thick x .734
inch O.D. flatwasher (4).
Tighten the shoulder screw (2) securely.
0031 00-1
