TM 10-5411-234-13&P
CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
UNIT MAINTENANCE
THREADED INSERT REPLACEMENT
THIS SECTION COVERS:
Replace
INITIAL SETUP:
Personnel Required: One
Maintenance Level - Unit
Materials/Parts
Methylethylketone (WP 0055, Table 1, Item 3)
Tools and Special Tools
Sandpaper (WP 0055, Table 1, Item 8)
General Mechanic Tool Kit (WP 0041, Table 2,
Wiping Rags (WP 0055, Table 1, Item 6)
Item 1)
Light, Incandescent Adjustable With Tripod Base
Masking tape (WP 0055, Table 1, Item 5)
Goggles,Industrial (WP 0041, Table 2, Item 3)
Alodine, Brush (WP 0055, Table 1, Item 12)
Drill,Electric,Portable (WP 0041, Table 2, Item 4)
Adhesive, Two Part Epoxy (WP 0055, Table 1,
Item 9)
Drill Set, Twist (WP 0041, Table 2, Item 5)
Cartridges, 1/10 Gallon, Empty (WP 0055, Table
1, Item 10)
Gloves,Chemical And Oil Protective (WP 0041,
Nozzle, 2 1/2 In Long With 1/8 In Orifice (WP
Table 2, Item 6)
Gun, Caulking (WP 0041, Table 2, Item 7)
Sheet, Aluminum, .032 Inch Thick X 12 Inches X
12 Inches (WP 0055, Table 1, Item 15)
Header, Hand-Operated (WP 0041, Table 2, Item
Sticks, Mixing (WP 0055, Table 1, Item 14)
11 OR 13)
Gloves, white, cloth (WP 0055, Table 1, Item 19)
REPLACING NON-POTTED (NON ADHESIVE ENCAPSULATED) INSERTS
NOTE
Inserts installed in extrusions are not potted. Knock out insert and
replace with same type.
Depending on insert size, select a drill bit in size range listed below:
Insert Thread Size
Drill Size Range Inches (mm)
10-32
19/64 (7.6)
1/4-28
25/64 (9.9)
5/16-24
17/32 (13.5)
3/8-24
17/32 (13.5)
0026 00-1
