TM 10-5411-234-13&P
CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
UNIT MAINTENANCE
SIDE WALL REPAIR OF DAMAGE WITH EXTENDED CRACKS
THIS SECTION COVERS:
Repair
INITIAL SETUP
Personnel Required: One
Maintenance Level - Unit
Materials/Parts
Methylethylketone (WP 0055, Table 1, Item 3)
Tools and Special Tools
Sandpaper (WP 0055, Table 1, Item 8)
General Mechanic Tool Kit (WP 0041, Table 2,
Wiping Rags (WP 0055, Table 1, Item 6)
Item 1)
Light, Incandescent Adjustable With Tripod Base
Masking tape (WP 0055, Table 1, Item 5)
Goggles,Industrial (WP 0041, Table 2, Item 3)
Alodine, Brush (WP 0055, Table 1, Item 12)
Drill,Electric,Portable (WP 0041, Table 2, Item 4)
Adhesive, Two Part Epoxy (WP 0055, Table 1,
Item 9)
Drill Set, Twist: W/25 Components And Metal Box,
Cartridges, 1/10 Gallon Empty (WP 0055, Table 1,
Numbered Series (WP 0041, Table 2, Item 8)
Item 10)
Drill Set, Twist (WP 0041, Table 2, Item 5)
Nozzle, 2 1/2 In Long With 1/8 In Orifice (WP
Gloves,Chemical And Oil Protective (WP 0041,
Sheet, Aluminum, .032 Inch Thick X 12 Inches X
Table 2, Item 6)
12 Inches (WP 0055, Table 1, Item 15)
Gun, Caulking (WP 0041, Table 2, Item 7)
Rivet, Blind, 1/8 Inch Dia. (WP 0055, Table 1,
Item 13)
Riveter, Hand Blind with 1/8 inch nosepiece (WP
Sticks, Mixing (WP 0055, Table 1, Item 14)
Router, Electric, Portable (WP 0041, Table 2, Item
10)
NOTE
The following procedure covers repair of extended cracks (such as a
long cut) in panel skin, (damaged area does not exceed 36 inches [91.44
cm] square).
WARNING
Safety goggles must be worn during repair to protect eyes from flying
metal chips. Failure to wear proper eye protection may result in eye
injury and/or blindness.
0021 00-1
