TM 10-5411-234-13&P
CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
0016 00
UNIT MAINTENANCE
Mounting ladder deployment brackets
Step 1. To install the brackets required to deploy the ladder on the tailgate, use a tape measure and make
a mark 12 inches from the front edge and along the right edge of the tailgate.
Step 2. At the 12 inch mark, draw a 3 inch horizontal line with a straightedge from the right edge of the
tailgate extending toward the left edge of the tailgate.
Step 3. Measure 1 inch in from the right edge of the tailgate. Mark this point on the drawn 3 inch line.
Note that this point marks the outer corner of the first mounting bracket.
Step 4. Place the first bracket in position so that its outer edge lies on the line 1 inch in from the right
edge of the tailgate. Be sure to use the smaller "deployment" bracket.The hooks on the bracket should
face the hinge on the tailgate. Orient the mounting holes on the first bracket to face outward and toward
the right edge of the tailgate. Mark the position of the two holes in the first bracket.
0016 00-11
