TM 10-5411-234-13&P
CARGO BED COVER (CBC), TYPE IV, 5 T CARGO TRUCK, MTV, AND MTV TRAILER
0016 00
UNIT MAINTENANCE
Step 2. At the 27 1/2 inch mark, draw a 2 inch vertical line from the front edge of the tailgate toward the
rear edge of the tailgate.
Step 3. Measure 1 1/2 inches from the front edge of the tailgate along the 2 inch vertical line and make a
mark.
Step 4. Make a second mark approximately 3 inches to the left of the 1 1/2 inch mark and draw a line
connecting the two marks with a straight edge.
Step 5. Place the first bracket in position at the intersection point located 27 1/2 inches in from the right
edge and 1 1/2 inches from the front edge of the tailgate. Be sure to select the larger "stowage" bracket
as these brackets are different from the smaller "deployment" brackets. Position the bracket so that the
mounting holes face the rear edge of the tailgate. Ensure that the opening on the bracket faces the right
edge of the tailgate. Mark the position of the two holes in the first bracket.
0016 00-5
