19-15. M1090/M1094 HYDRAULIC HOSES REPLACEMENT
This task covers:
a. Hydraulic Hose Locations
b. Follow-On Maintenance
Tools and Special Tools (Cont)
Engine shut down (TM 9-2320-366-10-1).
Crowfoot Attachment Socket Wrench (Item 9,
Tools and Special Tools
Dispenser, Pressure Sensitive Adhesive Tape
Crowfoot Attachment Socket Wrench (Item 5,
a. Hydraulic Hose Locations.
Wear appropriate eye protection when working under vehicle due to the possibility of falling
debris. Failure to comply may result in injury to personnel.
Prolonged contact with lubricating oil (MIL-L-2104) may cause a skin rash. Skin and clothing that
come in contact with lubricating oil should be thoroughly washed immediately. Saturated clothing
should be removed immediately. Areas in which lubricating oil is used should be well ventilated
to keep fumes to a minimum. Failure to comply may result in injury to personnel.
Cap or plug hoses and connection points to prevent contamination of M1090/M1094 dump body
hydraulic system. Failure to comply may result in damage to equipment.
Refer to Table 19-4. M1090/M1094 Hydraulic Hose Locations for locations of hydraulic hoses on the
M1090/M1094 dump body. It may not be necessary to remove all hydraulic hoses at one time.
Tag hoses and connection points prior to removal.
Remove plastic cable ties as required.
Remove clamps and support brackets as required.
Position drain pan to collect oil.