TM 9-2320-272-24-1
3-135. GOVERNOR PIPING AND CAPACITOR MAINTENANCE (Contd)
c. Installation
1.
Install bracket (18) on body (3) with two screws (29).
NOTE
Perform step 2 for M936/A1 series vehicles only.
Install bracket (18) on body (3) with two screws (36).
2.
3.
Install valve (19) on bracket (18) with two screws (20) and new locknuts (28).
NOTE
Male pipe threads must be wrapped with antiseize tape before
installation.
4.
Install elbow (21) and adapter (23) on valve (19).
5.
Install breather (22) on adapter (23).
6.
Install clevis (25) on rod (17).
7.
Install clevis (25) on valve (19) with pin (24), washer (26), and new cotter pin (27).
Install rod (17) on lever (16) with washer (34) and new cotter pin (33).
8.
9.
Install adapters (30) and (38) on valves (19) and (37).
Install hose (32) on adapters (30) and (38).
10.
11.
Install two new tiedown straps (31) on hoses (32) and (35).
Install clamp (4) on capacitor (5).
12.
13.
Install capacitor (5) and tee (6) on body (3) with new lockwasher (11) and screw (10).
Connect capacitor leads (2), (12), and (15) to leads (1), (13), and (14).
14.
15.
Install transmission 5th gear lock-up pressure switch (7) on tee (6).
Connect capacitor leads (8) and (9) to pressure switch (7).
16.
3-368
