TM 9-2320-272-24-1
3-136. TRANSMISSION BREATHER REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Antiseize tape (Appendix C, Item 72)
Rag (Appendix C, Item 58)
a. Removal
CAUTION
Clean area around breather before removal to prevent entry of
dirt. Damage may occur if dirt or dust enters the transmission.
Disconnect vent line (2) from transmission breather (1).
1.
Remove breather (1) and adapter (4) from transmission (3). Discard breather (1) and adapter (4) if
2.
threads are stripped.
b. Installation
NOTE
Male pipe threads must be wrapped with antiseize tape before
installation.
Install adapter (4) and breather (1) on transmission (3).
1.
Connect vent line (2) to transmission breather (1).
2.
3-372
