TM 9-2320-272-24-1
Table 2-3. Electrical Troubleshooting (Contd).
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
Step
4.
Connect lead 81A to battery switch pin A.
Step
5.
Disconnect lead 459 (pin B) at battery switch.
Step
6.
Place battery switch to ON position.
Step
7.
Connect multimeter positive lead to contact end of pin B.
Step
8.
Connect multimeter negative lead to ground.
a. Multimeter should indicate battery voltage. If voltage is not indicated, replace
battery switch (para. 3-107).
b. If voltage is indicated, connect lead 459 to battery switch (pin B), place battery switch
to OFF position, and go to test 4.
2-110
