TM 9-2320-260-20
I
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP
APPLICABLE MODELS
EQUIPMENT CONDITION
All
q Parking brake set (TM 9-2320-260-10).
q Headlight removed (para. 4-38).
MATERIALS/PARTS
Blackout light assembly removed (para. 4-41).
Ten locknuts
REFERENCES (TM)
TM 9-2320-260-10
TM 9-2320-260-20P
1.
Remove two locknuts (7), screws (19), and seal mounting bracket (20) from left headlight bracket (l).
Discard locknuts (7).
2. Remove two locknuts (22), washers (9), screws (10), and washers (9) from bracket (1) and side
panel (8). Discard locknuts (22).
3. Remove locknut (4), washer (3), and screw (21) from bracket (1) and brace (2). Discard locknut (4).
4. Remove locknut (11), screw (5), washer (6), and brace (2) from fender (12). Discard locknut (11).
5. Remove two locknuts (13), washers (14), screws (16), and washers (14) from bracket (1) and
fender (12). Discard locknuts (13).
6. Remove two locknuts (15), screws ( 18), washers ( 17), and bracket (1) from fender ( 12). Discard
locknuts (15).
1. Install left headlight bracket (1) on fender (12) with two washers (17), screws (18), and new
locknuts (15).
2. Secure bracket (1) to fender (12) with two washers (14), screws (16), washers (14), and new
locknuts (13).
3. Install brace (2) on fender (12) with washer (6), screw (5), and new locknut (11).
4. Secure brace (2) to bracket (1) with screw (21), washer (3), and new locknut (4).
5. Secure side panel (8) to bracket (1) with two washers (9), screws ( 10), washers (9), and new
locknuts (22).
Install seal mounting bracket (20) on bracket (1) with two screws (19) and new locknuts (7).
6.
11-16
