TM 11-7440-293-14
4-69. REMOVING/INSTALLING HUBBELL CONNECTOR PLUG.
This task covers:
1. Removal
2. Installation
INITIAL SETUP
Tools
Personnel Required
One mechanic
Flat-tip screwdriver
Materials/Parts
Equipment Condition
Power in vehicle off.
Hubbell connector plug
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Hubbell connector
1. 4 x 4-inch outlet
Unplug.
box
plug (1)
Remove.
2. Hubbell connector
Insulator disk (2)
plug
Using flat-tip screwdriver, loosen.
Screw (3), screw
3.
(4) and screw (5)
Remove.
Black wire (6),
4.
Lift wires away from screws.
white wire (7) and
green wire (8)
Using flat-tip screwdriver, loosen.
Screws (9)
5.
Remove.
Hubbell connector
6. Power cable
For storage, put hardware in cloth
plug (1)
bag, attach to Hubbell connector plug
and pack in original carton.
INSTALLATION
1. Power cable
Hubbell connector
Using flat-tip screwdriver, install.
plug (1) and
screws (9)
2. Hubbell connector
Using flat-tip screwdriver, install.
Black wire (6) and
screw (3)
plug
4-136