TM 11-7440-293-14
4-68. REMOVING PP-4763 POWER SUPPLY.
This task covers:
Removal
INITIAL SETUP
Tools
Personnel Required
Two mechanics
1/2-inch box end wrench
Materials/Parts
Equipment Condition
All power cables disconnected.
None
ACTION
REMARKS
ITEM
LOCATION
1. Curbside of power
Screw (1), lock-
Using 1/2-inch box wrench, remove.
washer (2) and
There are three screws. Step 1 is
supply
flat washer (3)
typical for all three screws.
Do step 1 again.
Screws (4)
2.
Do steps 1 and 2 again.
3. Roadside of
Angle bracket (5)
power supply
NOTE
A helper will be needed to lift and remove power supply.
4.
Power supply (6)
Remove.
4-134