TM 9-2320-392-10-2
M1090A1 TROOPSEAT KIT INSTALLATION/REMOVAL
0112 00
THIS WORK PACKAGE COVERS:
Installation, Removal
INITIAL SETUP:
Maintenance Level
Tools and Special Tools
Operator
Screwdriver, Flattip (Item 39, Table 2
Equipment Conditions
Wrench, Adjustable (Item 51,
Engine shut down (WP 0018 00).
Table 2, WP 0117 00)
Wheels chocked (WP 0018 00).
Personnel Required
Two
GENERAL
This work package contains information and instructions to install and remove the
M1090A1 Troopseat Kit.
INSTALLATION
CAUTION
Ensure seat post is flush with dump body floor prior to tightening bolts.
Failure to comply may result in damage to equipment.
NOTE
Left and right troopseats are installed the same way. Right side shown.
Steps 1 through 17 require the aid of an assistant.
1.
Install three dump body stakes (1) in dump body (2).
0112 00-1
