TM 9-2320-392-10-2
CLEANING VEHICLE - Continued
0107 00
Table 1. General Cleaning Instructions - Continued.
Cleaning Materials Used to Remove
Surface
Oil/Grease
Salt/Mud/
Surface
Dust/Debris
Rust/Corrosion
Rubber Insulation
Damp or dry rags.
Damp or dry rags.
Not applicable.
Tires
Soapy water and
High pressure water
Not applicable.
bristle brush.
and bristle brush.
Cable
Cleaning compound
Wire brush.
Wire brush and
lubricating oil.*
and wire brush.
*After cleaning, apply light grade of lubricating oil to all unprotected surfaces to prevent
continued rust.
CLEANING EXTERIOR
Wash vehicle as instructed in Table 1.
CLEANING INTERIOR
CAUTION
Do not allow water to contact electrical controls, gages, or indicators. Failure
to comply may result in damage to equipment.
1.
Remove loose dirt and dust from instrument panel assembly (1) with damp wiping
rag.
0107 00-5
