TM 9-2320-392-10-2
CHANGING TIRE-Continued
0105 00
TIRE INSTALLATION - Continued
CAUTION
Do not overtighten banjo bolt when installing CTIS hose on hollow wheel
stud. Failure to comply may result in damage to equipment.
9.
Install CTIS hose (29) on hollow wheel stud (30) with two washers (28) and banjo
bolt (27).
NOTE
Slotted hole in rim cover is aligned with pressure valve extension.
9.1 Position rim cover (37) on wheel (38) with four washers (39) and bolts (40).
9.2 Notify Field Maintenance to torque four rim cover bolts to 71-95 lb-ft (96-128 Nm).
0105 00-15
