TM 9-2320-392-10-2
HYDRAULIC SYSTEM TROUBLESHOOTING - Continued 0087 00
HYDRAULIC SYSTEM - Continued
Table 1. Hydraulic System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
1.
LOSS OF
2.
If loss of hydraulic pressure
HYDRAULIC
continues, notify Field
PRESSURE (SINGLE
Maintenance.
STAGE PUMP) -
Continued
CAUTION
Hydraulic oil level must not be above, or more than 0.75 in. (1.9 cm) below
black line on hydraulic oil view gage. Failure to comply may cause damage
to hydraulic system.
2.
LOSS OF
Check hydraulic oil
1.
If hydraulic oil view gage
HYDRAULIC
level at hydraulic
registers below black line,
PRESSURE (THREE
oil view gage.
remove reservoir cap and fill
STAGE PUMP)
hydraulic oil to appropriate
level (WP 0099 00, Table 15,
Item 9).
2.
Install reservoir cap.
3.
If loss of hydraulic pressure
continues, notify Field
Maintenance.
END OF WORK PACKAGE.
0087 00-2
