TM 9-2320-392-10-2
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0080 00
ELECTRICAL SYSTEM Continued
Table 3. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
155. DUMP BED AND
4. If FRONT BRAKE AIR or REAR
TAILGATE
BRAKE AIR pressure gage does
RELEASE DO NOT
not register 120 PSI, perform
OPERATE -
Air System Troubleshooting
Continued
(WP 0085 00, Malfunction 1,
Air System Loses Pressure
During Operation/Slow Air
Pressure Buildup).
2. Check circuit breaker
1. Remove PDP cover (WP 0113
CB50 in PCB to see if
it is tripped.
2. If circuit breaker is tripped,
push in to reset.
3. Position master power switch
to on (WP 0004 00).
4. Check circuit breaker to see if
it tripped. If circuit breaker is
tripped, notify Field
Maintenance.
0080 00-124
