TM 9-2320-392-10-2
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0080 00
ELECTRICAL SYSTEM Continued
Table 3. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
78. TRAILER
2. Check circuit breaker
1. Remove PDP cover (WP 0113
BLACKOUT
CB39 in PCB to see if
STOPLIGHTS DO
it is tripped
NOT ILLUMINATE -
Continued
2. If circuit breaker is tripped,
push in to reset.
3. Position master power switch
to on (WP 0004 00).
4. Check circuit breaker to see if
it is tripped again. If circuit
breaker is tripped or trips
again, Notify Field
Maintenance.
5. Position master power switch
to off (WP 0004 00).
6. Install PDP cover (WP 0113
0080 00-84
