TM 9-2320-392-10-2
ELECTRICAL SYSTEM TROUBLESHOOTING - Continued 0080 00
ELECTRICAL SYSTEM Continued
Table 3. Electrical System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
6.
ENGINE CRANKS
6. If engine cranks but still does
BUT DOES NOT
not start, notify Field
START -
Maintenance.
Continued
5. Is circuit breaker
1. Position MBDS to disconnect
CB60 tripped?
(OFF) (WP 0011 00).
WARNING
Vehicles are equipped with a Load and Battery Control Device
(LBCD). The LBCD has internal capacitors that must be discharged
prior to performing maintenance or troubleshooting procedures.
Failure to comply may result in damage to equipment and/or injury
to personnel.
2. Position master power switch
to on for 30 seconds (WP 0004
00).
3. Position master power switch
to off (WP 0004 00).
WARNING
Electrical power is still present inside the battery disconnect
enclosure with the MBDS in the disconnect (OFF) position. Do not
touch the studs of the MBDS. Failure to comply may result in injury
or death to personnel.
Remove rings, bracelets, wristwatches, neck chains, and any other
jewelry before working around vehicle. Jewelry may catch on
equipment of may short across an electrical circuit or battery
terminal. Failure to comply may result in serious injury or death to
personnel.
0080 00-19
