TM 9-2320-392-10-1
HIGHWAY EMERGENCY MARKER KIT SETUP -
0062 00
Continued
PREPARING MARKERS FOR USE - Continued
4.
Remove emergency marker kit (4) from tool box.
5.
Remove three markers (5) from emergency marker kit (4).
6.
Attach two ends of marker arms (6) with pin (7).
7.
Rotate marker arms (6) approximately 1/2 turn on base (8).
8. Perform steps 4 through 6 for second and third markers.
PLACING MARKERS ON UNDIVIDED, STRAIGHT HIGHWAY
1.
Place one marker (9) approximately 100 ft (30 m) in front of vehicle with marker
facing approaching traffic.
2.
Place second marker (10) approximately 10 ft (3 m) behind vehicle and about 5 ft
(1.5 m) out from side of vehicle with marker facing approaching traffic.
3. Place third marker (11) approximately 100 ft (30 m) behind vehicle with marker facing
approaching traffic.
0062 00-2
