TM 9-2320-392-10-1
M1078/M1078A1 AND M1083/M1083A1 SERIES
0042 00
TOWING CONNECTION/DISCONNECTION - Continued
FRONT DISCONNECTION - Continued
29. Raise underlift assembly (WP 0037 00).
30. Disconnect WRECKER REMOTE CONTROL (WP 0037 00).
31. Position PTO switch (27) to off.
32. Shut down engine (WP 0018 00).
33. Lower and remove two amber warning lights (WP 0070 00).
REAR CONNECTION
CAUTION
Front axle drive shaft must be removed on both M1078/M1078A1 and M1083/M1083A1
series vehicles prior to performing a rear connection lift and tow. Failure to comply may
result in damage to equipment.
1.
Notify Field Maintenance to remove front axle driveshaft from disabled vehicle.
2.
Remove two chains (1), emergency tow lights (2), and tow lights cable (3), two
shackles (6), clevis pins (7), from tool box.
0042 00-23
