TM 9-2320-392-10-1
M1078/M1078A1 AND M1083/M1083A1 SERIES
0042 00
TOWING CONNECTION/DISCONNECTION - Continued
FRONT CONNECTION - Continued
6.
Remove two linchpins (9) and pins (10) from two lift tools (11).
WARNING
Goggles must be worn when operating WRECKER CONTROL PANEL.
Blowing dust and debris may become airborne while engine is
running. Failure to comply may result in injury to personnel.
7.
Place UNDERLIFT lever (12) in UP position to raise crossbar (13) until lift tools (11)
are aligned with M1078/M1078A1 and/or M1083/M1083A1 tow eyes (14).
8.
Place STINGER lever (15) in OUT position to extend stinger (16) until lift tools (11)
are aligned with M1078/M1078A1 and/or M1083/M1083A1 tow eyes (14).
NOTE
Left and right side lift tools are installed on M1078/M1078A1/
M1083/M1083A1 tow eyes the same way. Left side shown.
9.
Install two lift tools (11) on bottom M1078/M1078A1 and/or M1083/M1083A1 tow
eyes (14) with pins (10) and linchpins (9).
0042 00-3
