TM 9-2320-392-10-1
M1008 SERIES TOWING
0039 00
CONNECTION/DISCONNECTION - Continued
REAR CONNECTION - Continued
CAUTION
Stinger cam lock is normally locked in second rectangular hole on stinger
when towing M1008. It may be necessary to lock stinger cam lock in third
rectangular hole on stinger if components mounted on rear of M1008
interfere with movement of crossbar. Lock stinger cam lock in hole which
will allow crossbar to rotate freely. Failure to comply may result in damage
to equipment.
It may be necessary to start with holes 4 or 5 on stinger when recovering a
vehicle on uneven ground. Once level ground is reached, lock stinger in
second hole. Failure to comply may result in damage to equipment.
10. Place STINGER lever (11) to IN position to retract stinger (12) until desired stinger
cam lock hole (13) is aligned.
11. Lock stinger cam lock (4).
0039 00-19
