TM 9-2320-392-10-1
M1089A1 UNDERLIFT ASSEMBLY OPERATION
0037 00
CONTINUED
CONNECT WRECKER REMOTE CONTROL - Continued
NOTE
WRECKER REMOTE CONTROL may be connected on either side of the vehicle.
Right side connection shown.
2.
Remove dust cap (9) from receptacle (10).
3.
Connect WRECKER REMOTE CONTROL (8) to receptacle (10).
NOTE
WRECKER REMOTE CONTROL switches operate the same as levers on
WRECKER CONTROL PANEL. For example; where procedure calls for
STINGER lever to be positioned to IN, position STINGER IN/OUT switch on
wrecker remote control to IN.
4.
Position STATION SELECTOR switch (11) to REMOTE CONTROL.
5.
Lower underlift assembly (WP 0037 00).
0037 00-5
