TROOPSEAT KIT LOWERING/RAISING - Continued
0029 00
RAISING TROOPSEATS WITH HOLDING BRACKET Continued
CAUTION
Troopseats must be stowed in the raised position when not in use. Failure to
comply may result in damage to equipment.
3.
Raise seat panel (7) up until edge of seat panel is under backrest (8).
4.
Fold drop leg (9) down to seat panel (7).
5.
Slide holding bracket (6) on backrest (8) and seat panel (7) until holding bracket (6)
is centered on seat panel (7).
6.
Pull hook and budgie cord (4) around and under bottom of seat panel (7).
7.
Pull up on hook and budgie cord (4) while pushing down on hook and budgie cord (5)
until the two hooks can connect.
0029 00-7
