TM 9-2320-366-20-5
(9) Remove self-locking nut (19), washer (20), bolt (21),
clamp half (22), and clamp half (23) from plate (24).
Discard self-locking nut.
NOTE
Step (10) requires the aid of an assistant.
(10) Remove three self-locking nuts (25), washers (26),
clamps (27), washers (28), clamp halves (29), clamp
halves (30), screws (31), washers (32), and mast (12)
from cab (33).
(11) Remove two self-locking nuts (34), washers (35), nylon
inserts (36), screws (37), washers (38), plate (24) and
two resilient mounts (39) from mast (12). Discard self-
locking nuts, nylon inserts, and resilient mounts.
22-11
