TM 9-2320-366-20-5
d. Installation.
WARNING
Adhesives,
solvents,
and
sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area. If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(1) Apply sealant on threads of three screws (1 and 2).
(2) Position AFT Storage Box (3) in cab with three
washers (4) and screws (1).
(3) Position three washers (5) and screws (2) in AFT
Storage Box (3).
(4) Tighten three screws (1 and 2) to 70-85 lb-in. (8-10
Nm).
(5) Apply sealant to threads of screws (6 and 7).
(6) Position washer (8) and screw (7) in AFT Storage
Box (3).
(7) Position angle (9) on cab with washer (10) and screw
(6).
(8) Position angle (9) on AFT Storage Box (3) with
washer (11), screw (12), and self-locking nut (13).
(9) Tighten two screws (6 and 7) to 70-85 lb-in. (8-10
Nm).
(10) Tighten self-locking nut (13) to 95-110 lb-in. (11-12
Nm).
Change 2
20-545
