TM 9-2320-366-20-5
20-76. M1085 TANK AND PUMP UNIT TIEDOWN KIT INSTALLATION/REMOVAL (CONT)
(34) Remove slack from four turnbuckles (14).
(35) Tighten four turnbuckles (14) 1 1/2 additional turns.
WARNING
Pump unit weighs approximately 870 lbs
(395 kgs). Attach a suitable lifting device
prior to installation. Failure to comply
may result in serious injury or death to
personnel or damage to equipment.
CAUTION
Use care when positioning pump unit on
cargo bed so hoses are not pinched or
crushed. Failure to comply may result in
damage to equipment.
NOTE
Holes in skid of pump unit face toward front of
vehicle.
Steps (36) and (37) require the aid of an
assistant.
(36) Route hoses (30 and 32) through holes in skid.
(37) Position pump unit (54) on cargo bed (29).
20-450
