TM 9-2320-366-20-4
(8) Position bracket (13) on front cooler bracket (14) with
two screws (15), four washers (16), and two self-locking
nuts (17).
(9) Tighten two self-locking nuts (17) to 33-37 lb-ft (45-50
Nm).
WARNING
Adhesive sealant MIL-S-46163 can damage
your eyes. Wear safety goggles/glasses
when using; avoid contact with eyes. If
sealant contacts eyes, flush eyes with
water and get immediate medical
attention. Failure to comply may result in
injury to personnel.
(10) Apply sealing compound to threads of two screws (18
and 19).
NOTE
Step (11) requires the aid of an assistant.
(11) Position two isolators (20) on catwalk (21) with two
washers (22) and screws (18).
(12) Position two isolators (23) on catwalk (21) with two
screws (19).
(13) Tighten two screws (18 and 19) to 33-47 lb-ft (45-64
Nm).
14-27
