TM 9-2320-366-20-4
11-19. PARK CONTROL TWO-WAY CHECK VALVE REPLACEMENT (CONT)
WARNING
Adhesives, solvents, and sealing com-
pounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. Keep away from open fire
and use in a well-ventilated area.
If
adhesive, solvent, or sealing compound
gets on skin or clothing, wash
immediately with soap and water. Failure
to comply may result in injury to
personnel.
(7) Apply antiseize compound to threads of two
adapters (5).
(8) Install two air pressure transmitters (1) with
adapters (2) in tee fittings (4).
(9) Position park control two-way check valve (6) on
bracket (7) with screw (8), washer (9), and self-
locking nut (10).
(10) Tighten self-locking nut (9) to 13-16 lb-ft (18-22
N m).
11-110
Change 2
