TM 9-2320-366-20-4
7-127. POWER TAKE-OFF (PTO) CABLE ASSEMBLY REPLACEMENT (CONT)
(3) Remove self-locking nut (5) and terminal lug TL76 (6)
from screw (7). Discard self-locking nut.
(4) Remove self-locking nut (8), clamp (9), and screw (10)
from bracket (11). Discard self-locking nut.
(5) Remove PTO cable assembly (12) from clamp (9).
(6) Disconnect connector clamp (13) from connector P209A
(14).
(7) Disconnect connector J209A (15) from connector P209A
(14).
NOTE
Perform steps (8) and (9) on M1088 and
M1089.
(8) Disconnect connector clamp (16) from connector P209B
(17).
(9) Disconnect connector J209B (18) from connector P209B
(17).
7-622
