TM 9-2320-366-20-4
7-121. M1089 TELESCOPE IN SOLENOID CABLE REPLACEMENT (CONT)
b. Installation.
(1) Install telescope in solenoid cable (1) through
compression nut (2), washer (3), and connector (4).
(2) Install compression nut (2) on connector (4).
(3) Install quick disconnect terminal (5) on black wire (6).
(4) Install terminal lug (7) on white wire (8).
(5) Install quick disconnect terminal (5) on ground strip (9)
position 15.
(6) Install terminal lug (7) on terminal block (10) position 12
with screw (11).
(7) Apply varnish to quick disconnect terminal (5) and
terminal lug (7).
7-598