TM 9-2320-366-20-4
(56) Position two clamps (102) on rear lights cable assembly
(1).
(57) Install two clamps (102) on brackets (103) with washers
(104), screws (105), and self-locking nuts (106).
(58) Tighten self-locking nuts (106) to 84-108 lb-in. (10-12
Nm).
(59) Remove screw (107) and washer (108) from right rear
composite light mounting bracket (109).
(60) Install terminal lug TL21 (110) on right rear composite
light mounting bracket (109) with washer (108) and
screw (107).
(61) Connect connectors P64 (111), P63 (112), P62 (113),
and P61 (114) to right rear taillight connectors 24 (115),
23 (116), 22 (117), and 21 (118).
Change 1
7-525
