TM 9-2320-366-20-4
(5) Position PDP (6) on dashboard (7) with three screws (8).
(6) Install three washers (9), screws (10) and PDP (6) on
dashboard (7).
(7) Position grille (11) on cab (3) with washer (12) and
screw (13).
(8) Position two washers (14) and screws (15) in grille (11).
(9) Tighten screw (13) to 48-60 lb-in. (5-7 Nm).
(10) Tighten two screws (15) to 24 lb-in. (3 Nm).
(11) Raise cab (TM 9-2320-366-10-1).
(12) Install clamp (16) on rear lights cable assembly (1).
(13) Install two clamps (16) and (17) on right frame rail (18)
with screw (19) and self-locking nut (20).
(14) Tighten self-locking nut (20) to 84-108 lb-in. (10-12 Nm).
Change 1
7-517
