TM 9-2320-366-20-4
7-83. M1089 WRECKER CONTROL PANEL WIRING HARNESS REPLACEMENT (CONT)
NOTE
Remove plastic cable ties as required.
Tag wires and connection points prior to
disconnecting.
Cut wires at end of conductor splice to allow
enough wire remaining to attach replacement
wiring harness.
(3) Cut EMERGENCY SHUTDOWN switch wire (9) from
conductor splice (10).
(4) Cut EMERGENCY SHUTDOWN switch wire (11) from
conductor splice (12).
(5) Cut STATION SELECTOR switch wire (13) from
conductor splice (14).
(6) Cut STATION SELECTOR switch wire (15) from
conductor splice (16).
(7) Cut to STATION SELECTOR switch wire (17) from
conductor splice (18).
(8) Cut MAIN WINCH RH SPEED switch wire (19) from
conductor splice (20).
(9) Cut MAIN WINCH RH SPEED switch wire (21) from
conductor splice (22).
7-390
Change 1
