TM 9-2320-272-24-4
1.
Position roller (6) in roller arm (3).
2.
Coat roller pin (5) with light film of GAA grease and insert through roller arm (3) and roller (6). Tap
pins (5) into place with soft-faced hammer.
3.
Install roller (6) on roller arm (3) with two pins (2)
Install roller arm (3) on hoist cylinder crosshead shaft (1).
Install dump body (para. 4-144).
FOLLOW-ON TASKS:
Lubricate roller arms (LO 9-2320-272-12).
5-613
