TM 9-2320-272-24-4
1.
Remove four screws (5) and two pivots (6) from hinged floor (1).
2.
Remove thirty screws (7), two retainers (8), four seals (9), and two channels (15) from hinged
floor (1). Discard seals (9).
3.
Remove ten screws (13) and five pads (14) from hinged floor (1).
4.
Remove four screws (11) and handle (12) from hinged floor (1).
5.
Remove seal (10) from hinged floor (1). Discard seal (10).
NOTE
Perform step 6 only if inspection requires replacement of hinge.
6.
Remove fifty-six rivets (16) and hinge (4) from under-frame (17). Discard rivets (16).
5-487
