TM 9-2320-272-24-4
THIS TASK COVERS:
c. End Roller Removal
a. Support Roller Removal
d. End Roller Installation
b. Support Roller Installation
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
M934/A1/A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake (TM 9-2320-272-10).
MATERIALS/PARTS
Van body sides fully expanded and secured
Four cotter pins (Appendix D, Item 72)
(TM 9-2320-272-10).
NOTE
All support rollers are removed basically the same way, This
procedure is for left-rear support rollers.
1.
Remove seven screws (2), clamps (3), and cover (4) from underframe (1)
2.
Remove two cotter pins (5), support roller shaft (7), and support roller (6) from underframe (1).
Discard cotter pins (5).
1.
Install support roller (6) on underframe (1) with support roller shaft (7) and two new cotter pins (5).
2.
Install cover (4) on underframe (1) with seven clamps (3) and screws (2).
5-474
