TM 9-2320-272-24-4
5-59. TRANSMISSION HOUSING MAINTENANCE
THIS TASK COVERS:
c. Assembly
a. Disassembly
b. Cleaning and Inspection
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-24P
SPECIAL ENVIRONMENTAL CONDITIONS
TOOLS
Work area clean and free from blowing dirt and
dust.
a. Disassembly
Remove four plugs (3) from transmission housing (1).
b. Cleaning and Inspection
For general cleaning instructions, refer to para. 2-14.
1.
For general inspection instructions, refer to para. 2-15.
2.
If adapter (2) is defective, replace adapter (2).
3.
c.
Assembly
Install four plugs (3) in transmission housing (1). Tighten 4-5 lb-ft (5-7 N-m).
1.
NOTE
Perform step 2 if early model transmission is to have wide oil
Change data plate (4) part number to 23040127.
2.
5-384