TM 9-2320-272-24-4
5-23. INJECTOR FLOW TEST (Contd)
29.
Open hydraulic valve (2) on injector test stand.
30.
Close air valve (3) on injector test stand.
31.
Remove injector (1) from injector test stand.
32.
Slide test stand link (7) out of burnishing tool adapter.
33.
Remove two pins (4) and retainer plate (5) from burnishing tool adapter.
34.
Remove burnishing tool adapter from injector (6).
35.
Remove plunger (8) and spring (9) from injector (1).
36.
Install screen (10) in injector orifice (12) with screen retainer (11).
37.
Place spring (9) in plunger (8) and slide in injector (1).
NOTE
Store injectors in a clean place.
5-154
