TM 9-2320-272-24-4
5-11. ENGINE OIL PUMP REPAIR (Contd)
14.
Apply lubricating oil to gears (6) and (10), shafts (2) and (3), and gear pockets.
NOTE
Screw is an installation screw and cannot be tightened at this
time.
15.
Position screw (14) and new lockwasher (15) in inner body (9).
16.
Install new gasket (12) and filter head (13) on inner body (9) with two screws (17), new lockwashers
(16), six screws (18), and new lockwashers (19). Use soft-faced hammer to seat filter head (13). Tighten
screws (17) and (18) 30-35 lb-ft (41-47 Nm).
5-89
