TM 9-2320-272-24-3
4-226. DEEPWATER FORDING PRESSURIZATION VALVE REPLACEMENT (Contd)
NOTE
All male threads must be wrapped with antiseize tape before
installation,
Connect pressurization valve (22) on crankcase breather (3) with hose (2) and two clamps (1).
1.
Install pressurization valve bracket (23) on rocker lever cover (4) with new lockwasher (31) and
2.
screw (30).
Connect power steering pump hose (13) to pressurization valve connector (14).
3.
Install power steering pump hose (13) on radiator support bracket (10) and bracket (9) with
4.
clamp (ll), screw (12), and new locknut (8).
Connect pressurization hose (6) and vent hose (5) to pressurization valve connectors (7).
5.
Install crankcase breather tube (15) on pressurization valve elbow (27) with hose (17) and two
6.
clamps (16).
NOTE
Perform step 7 for vehicles equipped with positive crankcase
ventilation system.
Install crankcase vent tube (32) on pressurization valve elbow (34) with hose (35) and two
7.
clamps (33).
Connect supply hose (20) to pressurized valve adapter (21).
8.
Install control cable (26) on nut (28) and tighten screw (29).
9.
10.
Install control cable (26) on fording cable bracket (24) with clamp (19), two screws (18), and new
locknuts (25).
4-1032
