TM 9-2320-272-24-3
4-211. TRANSMISSION POWER TAKEOFF (PTO) REPLACEMENT
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
LO 9-2320-272-12
M925, M928, M929, M930, M932, M936
TM 9-2320-272-10
TOOLS
TM 9-2320-272-24P
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
MATERIALS/PARTS
l Parking brake set (TM 9-2320-272-10).
Transmission PTO-to-hydraulic pump propeller
Cotter pin (Appendix D, Item 84)
l
Locknut (Appendix D, Item 288)
shaft removed (para. 3-334).
Gasket (Appendix D, Item 238)
Transmission oil dipstick tube removed (para. 3-3).
l
Cap and plug set (Appendix C, Item 14)
Lubricating oil (Appendix C, Item 48)
Antiseize tape (Appendix C, Item 72)
a. Removal
1.
Open transmission dipstick access door (1) on inside of cab (TM 9-2320-272-10).
2.
Remove two nuts (3), screws (8), clamp (7), and spacer (5) from PTO cable bracket (4).
3.
Remove cotter pin (12) and washer (11) from PTO cable pin (9), and lift PTO cable pin (9) away from
select lever (10). Discard cotter pin (12).
4.
Tie PTO cable (6) clear of work area.
5.
Remove screw (16), washer (15), and bracket (4) from PTO (19).
6.
Remove screw (17), washer (18), two screws (14), and washers (13) from PTO (19) and
transmission (2).
4-982
