TM 9-2320-272-24-3
THIS TASK COVERS:
b. Installation
a. Removal
INITIAL SETUP:
REFERENCES (TM)
APPLICABLE MODELS
LO 9-2320-272-12
M936/A1/A2
TM 9-2320-272-10
TOOLS
TM 9-2320-272-24P
General mechanic's tool kit (Appendix E, Item 1)
EQUIPMENT CONDITION
Torque wrench (Appendix E, Item 144)
Parking brake set (TM 9-2320-272-10).
Hydraulic oil reservoir drained (LO 9-2320-272-12).
MATERIALS/PARTS
Four locknuts (Appendix D, Item 285)
Cap and plugs (Appendix C, Item 14)
1.
Remove five screws (1) and control valve cover (2) from gondola (3).
CAUTION
When disconnecting hydraulic lines, plug all openings to prevent
dirt from entering and causing internal damage to parts.
NOTE
Have drainage container ready to catch oil.
Tag hydraulic lines for installation.
2.
Disconnect hydraulic oil reservoir crossover tube (10) from control valve elbow (11).
3.
Remove control valve elbow (11) from control valve adapter (4).
4.
Disconnect two hydraulic swinger motor flex lines (17) from control valve adapter fittings (16).
5.
Disconnect two hydraulic crowd cylinder flex lines (18) from control valve adapter fittings (15).
4-938
