TM 9-2320-272-24-3
THIS TASK COVERS:
c. Installation
a. Wiring Harness Disconnection
d. Wiring Harness Connection
b. Removal
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
TM 9-2320-272-10
M936/A1/A2
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10)
Torque wrench (Appendix E, Item 144)
Boom removed (para. 4-194).
MATERIALS/PARTS
Battery ground cables disconnected (para. 3-126).
Six lockwashers (Appendix D, Item 354)
GENERAL SAFETY INSTRUCTIONS
Lockwasher (Appendix D, Item 350)
All personnel must stand clear during lifting
Lockwasher (Appendix D, Item 379)
Cap and plug set (Appendix C, Item 14)
operations.
NOTE
Tag all parts for installation.
Disconnect wires (5) and (6) of electrical swivel harness (4) from crane wiring harness (7).
1.
Remove nut (8), ground wire (9), nut (8), and lockwasher (10) from frame (11) through underside of
2.
vehicle. Discard lockwasher (10).
Disconnect swivel wire harness (13), wires (14) and (17), and ground wire (15) from floodlight
3.
harness (16).
Remove screw (3), lockwasher (2), and washer (1) from electrical swivel (12). Discard lockwasher (2).
4.
4-926
