TM 9-2320-272-24-3
4-140. ENGINE ACCESS COVER (IN-CAB) REPLACEMENT
THIS TASK COVERS:
a. Removal
b. Installation
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT C0NDITION
General mechanic's tool kit (Appendix E, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Transmission console removed (para. 474).
Adhesive (Appendix C, Item 7)
Winch console removed (if equipped) (para. 4-74).
Instrument cluster removed (para. 3-83).
a. Removal
1.
Pull back cab floor insulation (3), firewall insulation (1), and access cover insulation (6) to expose
screw-assembled washers (7).
2.
Remove sixteen screw-assembled washers (7) and access cover (2) from firewall (5) and cab floor (4).
b. Installation
1.
Install access cover (2) on firewall (5) and cab floor (4) with sixteen screw-assembled washers (7).
2.
Apply adhesive to back side of cab floor insulation (3), firewall insulation (1), and access cover
insulation (6) and press into place on access cover (2), firewall (5), and cab floor (4).
4-712
