TM 9-2320-272-24-3
4-137. CAB DOOR GLASS REPAIR
THIS TASK COVERS:
a. Disassembly
b. Assembly
INITIAL SETUP:
APPLICABLE MODELS
REFERENCES (TM)
All
TM 9-2320-272-10
TM 9-2320-272-24P
TOOLS
EQUIPMENT CONDITION
General mechanic's tool kit (AppendixE, Item 1)
Parking brake set (TM 9-2320-272-10).
MATERIALS/PARTS
Cab door glass removed (para. 3-314).
Regulator channel filler (Appendix D, Item 528)
GENERAL SAFETY INSTRUCTIONS
Regulator channel seal (Appendix D, Item 529)
Frame seal (Appendix D, Item 131)
Eyeshields required when replacing cab door glass.
WARNING
Use eyeshields when replacing door glass. Glass could shatter,
causing injury to personnel.
a Disassembly
1.
Remove four screws (3), regulator channel (4), regulator channel filler (5), and regulator channel
seal (6) from frame (2). Discard regulator channel filler (5) and regulator channel seal (6).
2.
Carefully slide glass (7) from frame (2).
3.
Remove frame seal (1) from frame (2). Discard frame seal (1).
b. Assembly
1.
Position new frame seal (1) on top and sides of glass (7).
2.
Position glass (7) with frame seal (1) in frame (2).
3.
Install regulator channel seal (6), regulator channel filler (5), and regulator channel (4) on
glass (7) and frame (2) with four screws (3).
4-706
